October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Diagnostic Test

CHECK FOR AN ACTIVE DIAGNOSTIC TROUBLE CODE (DTC)

NOTE:

Diagnose and repair any BCM VIN or Communication DTCs before continuing with this test.

Turn the ignition on.
With the scan tool, read DTCs.
Does the scan tool display this DTC as active?

Yes
- Verify the correct vehicle configuration is programmed in the BCM.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
- Perform the RESTRAINTS SYSTEM VERIFICATION TEST. Refer to RESTRAINTS SYSTEM INTERMITTENT TEST .
No
- Use the scan tool to read DTCs in all other modules and verify correct OCM part number. If any communication DTCs are present, perform the appropriate diagnostic procedure. Perform any Technical Service Bulletins that apply. If no problems are found, replace the Occupant Classification Module. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION .
- Perform the RESTRAINTS SYSTEM VERIFICATION TEST. Refer to RESTRAINTS SYSTEM INTERMITTENT TEST .