Module, Dual Clutch Selector (DCSM)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| P0562-00 | SYSTEM VOLTAGE LOW |
| P0563-00 | SYSTEM VOLTAGE HIGH |
| P0606-00 | CONTROL MODULE PROCESSOR |
| P0607-00 | CONTROL MODULE PERFORMANCE |
| P060A-00 | INTERNAL CONTROL MODULE MONITORING PROCESSOR PERFORMANCE |
| P0814-00 | TRANSMISSION RANGE DISPLAY CIRCUIT |
| P081C-00 | PARK INPUT CIRCUIT |
| P0914-00 | GEAR SHIFT POSITION CIRCUIT LIGHT FAULT |
| P0919-00 | GEAR SHIFT POSITION CONTROL ERROR HEAVY FAULT |
| P0928-00 | GEAR SHIFT LOCK SOLENOID-ACTUATOR CONTROL CIRCUIT A-OPEN |
| P0929-00 | GEAR SHIFT LOCK SOLENOID-ACTUATOR CONTROL CIRCUIT A RANGE-PERFORMANCE |
| P0955-00 | AUTO SHIFT MANUAL MODE CIRCUIT GENERAL ELECTRICAL FAILURE |
| P1C73-00 | PARK SWITCH CIRCUIT STUCK |
| P1C82-00 | AUTO SHIFT MANUAL MODE CIRCUIT SIGNAL STUCK |
| U0001-00 | DUAL CLUTCH SHIFTER MODULE DCSM CAN COMMUNICATION BUS OFF |
| U0002-00 | DUAL CLUTCH SHIFTER MODULE DCSM CAN COMMUNICATION BUS PERFORMANCE NODE MUTE |
| U0100-00 | LOST COMMUNICATION WITH ECM/PCM |
| U0101-00 | LOST COMMUNICATION WITH DCTM |
| U0155-00 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER IPC CONTROL MODULE |
| U0401-00 | INVALID DATA RECEIVED FROM ECM PCM A |
| U0402-00 | INVALID DATA RECEIVED FROM DCTM |
| U0422-00 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE |
| U0423-00 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL |
| U1400-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U1701-00 | ENGINE1 (FROM ENGINE CONTROL MODULE) MISSING MESSAGE |
| U1930-00 | DCSM_OPERATIONALMODESTS SNA PLAUSIBILITY |
| U1932-00 | BCM_COMMAND OPERATIONALMODESTS (SNA) PLAUSIBILITY |
| U1933-00 | BCM_COMMAND (FROM BODY CONTROL MODULE) MISSING MESSAGE |
| U1934-00 | BCM_COMMAND FROM BCM AND BODY2 FROM BCM MISSING MESSAGE |
| U193C-00 | BCM_COMMAND (FROM BCM) AND ENGINE1 (FROM ECM) MISSING MESSAGE |
| U1950-00 | BCM COMMAND (FROM BODY CONTROL MODULE) MESSAGE CRC OR MESSAGE COUNTER FAULT |
| U1960-00 | ENGINE1 FROM ENGINE CONTROL MODULE MESSAGE CRC OR MESSAGE COUNTER FAULT |
| U197C-00 | TRANSM2 FROM TRANSMISSION CONTROL MODULE MESSAGE CRC OR MESSAGE COUNTER FAULT |