Diagnostic Test
CHECK FOR AN ACTIVE DTC
NOTE:
Diagnose and repair any ECT or AAT Sensor DTCs that may be present before continuing with this test procedure.
NOTE:
Diagnose and repair any BCM LIN BUS communication or IBS DTCs that may be present before continuing with this test procedure.
- With the scan tool, read DTCs and record on the repair order.
Is the DTC active or pending?
Yes
- Replace the Intelligent Battery Sensor in accordance with the Service Information.
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
No
- Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT CONDITION .