LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Electrical >> Body Electrical >> Circuit Testing Procedures - Non-DTC-Based Diagnostics >> Removal >> Connector Terminal Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Connector Terminal Removal

GC0137482Courtesy of CHRYSLER GROUP, LLC
1 - DRESS COVER
2 - CONNECTOR LOCK
3 - CONNECTOR
  1. Disconnect battery.
  2. Release Connector Lock (2).
  3. Disconnect the connector (3) being repaired from its mating half/component.
  4. Remove the dress cover (if applicable) (1).
    GC0137483Courtesy of CHRYSLER GROUP, LLC
    1 - Secondary Terminal Lock
  5. Release the Secondary Terminal Lock, if required (1).
    GC0137484Courtesy of CHRYSLER GROUP, LLC
    1 - TYPICAL CONNECTOR
    2 - PICK FROM TERMINAL REMOVER KIT 10300
    3 - APEX CONNECTOR
    4 - PICK FROM TERMINAL REMOVER KIT 10300
    5 - AUGAT CONNECTOR
    6 - ELECTRICAL TERMINAL REMOVAL TOOL
    7 - MOLEX CONNECTOR
    8 - PICK FROM TERMINAL REMOVER KIT 10300
    9 - THOMAS AND BETTS CONNECTOR
    10 - TERMINAL REMOVER
    11 - CONNECTOR
    12 - ELECTRICAL TERMINAL REMOVER
  6. Position the connector locking finger away from the terminal using the proper special tool. Pull on the wire to remove the terminal from the connector.
scientia non olet · About LEMON Manuals