October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Bank 1
 Courtesy of CHRYSLER GROUP, LLC
|
- Check condition of Temperature and Manifold Absolute Pressure (TMAP) sensor O-ring seal.
- Clean the sensor sealing area on the supercharger.
- Lubricate the TMAP sensor O-ring seal with clean engine oil.
- Install the TMAP sensor (3) into the supercharger. Tighten the screw (1) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS
.
- Connect the TMAP sensor wire harness connector (2).
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the left side engine cover (1).
- Connect the negative battery cable.