LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seats (Service Information) >> Switch, Lumbar Control >> Removal And Installation >> Four Way Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Four Way Switch: Installation

  1. Check that the lumbar control switch is not damaged.
  2. Install the lumbar control switch to the seat side shield.
  3. Connect the electrical harness connector to the switch.
  4. Install the seat side shield. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals