LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Compass Latitude, Eng CD EDE, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> Speaker >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation: Speaker: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the EAM speaker close to the instrument panel.
  2. Connect the instrument panel wiring harness connector.
  3. Install and tighten the two screws for the EAM. Tighten the screws securely.
  4. Install the defrost grille. Refer to GRILLE, DEFROSTER, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals