LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Power Liftgate (Service Information)) >> Chime >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Section 15 (Power Liftgate (Service Information)): Chime: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0146068Courtesy of CHRYSLER GROUP, LLC
  1. Position the power liftgate chime (3) to the left inner D-pillar (1) in the vehicle.
  2. Engage the retainer integral to the chime housing into the hole in the inner D-pillar.
  3. Reconnect the chime pigtail wire connector to the body wire harness connector (4) for the chime.
  4. Engage the retainer integral to the chime pigtail wire connector with the hole in the inner D-pillar.
  5. Reinstall the quarter trim panel to the lower left inner D-pillar. Refer to PANEL, QUARTER TRIM, INSTALLATION .
  6. Reinstall the scuff plat onto the liftgate opening sill (2). Refer to PLATE, SCUFF, LIFTGATE, INSTALLATION .
  7. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals