LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Differential Pressure >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Differential Pressure: Removal: Removal

Fig 1: Exhaust Differential Pressure Sensor & Pressure Tubes
GC0145429Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the diesel particulate filter. Refer to FILTER, DIESEL PARTICULATE, REMOVAL .
  4. If necessary, remove the mounting nut securing the differential pressure sensor to the steady rest mount.
  5. Disconnect the differential pressure sensor harness connector (1).
  6. Remove nut (2) and the differential pressure sensor (3).
scientia non olet · About LEMON Manuals