LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2015 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Active Noise Cancellation (ANC) >> Removal >> Module Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module Removal

NOTE:

This procedure is for Alpine audio system. For all other audio systems, refer to AMPLIFIER, REMOVAL .

Fig 1: Fasteners, Wire Harness Connectors & ANC Module Bracket
GC0172171Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the right quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
  3. Remove the subwoofer. Refer to SPEAKER, REMOVAL .
  4. Disconnect the two wire harness connectors (3) from the Active Noise Cancellation (ANC).
  5. Remove the fasteners (1), (4) and remove the ANC module .
  6. Remove the retainers from the ANC module bracket (2).
scientia non olet · About LEMON Manuals