LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Grand Cherokee SRT >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Keyless Ignition Node: Installation: Installation

Fig 1: Wire Connector, Clips & KIN
GC0147718Courtesy of CHRYSLER GROUP, LLC
  1. Push the Keyless Ignition Node (KIN) (3) into the instrument panel until it snaps into place.
  2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector (1).
    Fig 2: Center Bezel Retaining Clips
    GC0145461Courtesy of CHRYSLER GROUP, LLC
  3. Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals