LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Front Suspension & Wheel Alignment) >> Wheel Alignment >> Specifications >> Specifications >> Diesel Engine
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diesel Engine

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
4X4

FRONT WHEEL ALIGNMENT  PREFERRED SETTING  ACCEPTABLE RANGE 
CAMBER -0.87° -1.42° to -0.32°
Cross Camber (Maximum Side-To-Side Difference) 0.00° -0.60° to +0.60°
CASTER* - LEFT(1) +3.00° +2.00° to +4.00°
CASTER* - RIGHT (1) +2.70° +1.70° to +3.70°
Cross Caster (Maximum Side-To-Side Difference) 0.30° -0.70° to +1.30°
TOE - TOTAL**(2) +0.20° 0.00° to +0.40°
Notes:
(1) * For reference only. These are nonadjustable angles.
(2) ** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
Positive toe (+) is toe-in and negative toe (-) is toe-out.
REAR WHEEL ALIGNMENT  PREFERRED SETTING  ACCEPTABLE RANGE 
CAMBER -0.92° -1.57° to -0.27°
Cross Camber (Maximum Side-To-Side Difference) 0.00° -0.80° to +0.80°
TOE - TOTAL*(1) +0.20° -0.05° to +0.45°
THRUST ANGLE 0.00° -0.15° to +0.15°
Notes:
(1) * TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
Positive toe (+) is toe-in and negative toe (-) is toe-out.


4X2

FRONT WHEEL ALIGNMENT  PREFERRED SETTING  ACCEPTABLE RANGE 
CAMBER -0.64° -1.19° to -0.09°
Cross Camber (Maximum Side-To-Side Difference) 0.00° -0.60° to +0.60°
CASTER* - LEFT(1) +3.00° +2.00° to +4.00°
CASTER* - RIGHT (1) +2.70° +1.70° to +3.70°
Cross Caster (Maximum Side-To-Side Difference) 0.30° -0.70° to +1.30°
TOE - TOTAL**(2) +0.20° 0.00° to +0.40°
Notes:
(1) * For reference only. These are nonadjustable angles.
(2) ** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
Positive toe (+) is toe-in and negative toe (-) is toe-out.
REAR WHEEL ALIGNMENT  PREFERRED SETTING  ACCEPTABLE RANGE 
CAMBER -0.61° -1.26° to +0.04°
Cross Camber (Maximum Side-To-Side Difference) 0.00° -0.80° to +0.80°
TOE - TOTAL*(1) +0.20° -0.05° to +0.45°
THRUST ANGLE 0.00° -0.15° to +0.15°
Notes:
(1) * TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
Positive toe (+) is toe-in and negative toe (-) is toe-out.
scientia non olet · About LEMON Manuals