Sensor, Differential Pressure: Installation
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install pressure differential sensor (2). Tighten bolt (1) to 10 Nm (89 lbf-in.).
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect the pressure differential sensor (1) vacuum lines (3).
- Connect the pressure differential sensor (1) harness connector (2).
- Connect the negative battery cable.