LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Driveline Module >> Output Flange Seal >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Output Flange Seal: Installation: Installation

Fig 1: Seal Onto Installer
GC0083901Courtesy of CHRYSLER GROUP, LLC
  1. Place the seal on the installer.
    Fig 2: Installing Pinion Side Seal
    GC0083902Courtesy of CHRYSLER GROUP, LLC
  2. Install the pinion side seal using Installer (special tool #9893, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
  3. Install right side halfshaft. Refer to INSTALLATION .
    Fig 3: Seal Onto Installer
    GC0083901Courtesy of CHRYSLER GROUP, LLC
  4. Place the seal on the installer.
    Fig 4: Installing Ring Gear Side Seal
    GC0083903Courtesy of CHRYSLER GROUP, LLC
  5. Install the ring gear side seal using Installer (special tool #9893, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
  6. Install left side halfshaft. Refer to INSTALLATION .
  7. Fill RDA as needed. Refer to STANDARD PROCEDURE .
  8. Lower vehicle and road test.
scientia non olet · About LEMON Manuals