Diagnosis And Testing - Boost Pressure Sensor

If the boost pressure sensor fails, the PCM records a DTC into memory and continues to operate the engine in one of the three limp-in modes. When the PCM is operating in this mode, a loss of power will be present, as if the turbocharger was not operating. The best method for diagnosing faults with the boost pressure sensor is with a scan tool. Refer to the appropriate Diesel ELECTRICAL DIAGNOSTICS information for more information.

Refer to On-Board Diagnostics in Emissions Control System for a list of Diagnostic Trouble Codes (DTCs) for certain fuel system components. Refer to the appropriate Diagnostic Information.