Module, Radio Frequency (RF Hub): Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Electrical Connectors & Two Rear Push Pin Fasteners

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Partially remove the headliner to access the RF-Hub located at the center rear. Refer to HEADLINER, REMOVAL .

Fig 2: Electrical Connectors, Retainers & RF Hub
Courtesy of CHRYSLER GROUP, LLC
Disconnect the electrical connectors (1).
If equipped, disconnect the remote start antenna connector.
Remove the retainers (2) and remove the RF Hub (3) from the vehicle.