LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Exhaust System) >> Sensor, Exhaust Temperature [EXF] >> Installation >> Exhaust Temperature Sensor 1/2
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Exhaust Temperature Sensor 1/2

WARNING: This page is about a different car, the 2011 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust Temperature Sensor
GC0146437Courtesy of CHRYSLER LLC
  1. Install the exhaust temperature sensor (1) and tighten to 47 N.m (35 ft. lbs.).
    Fig 2: Exhaust Temperature Sensor Connector
    GC0146438Courtesy of CHRYSLER LLC
  2. Connect the exhaust temperature sensor wire harness connector (1).
  3. Install the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION , INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals