LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Pump >> Installation >> 6.4L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Steering System: Pump: Installation: 6.4L

Fig 1: Power Steering Pump Pulley & Bolts
GC0153845Courtesy of CHRYSLER GROUP, LLC
  1. Position the power steering pump and using the holes in the pulley (2) for access, install the three pump mounting bolts (1) and tighten to 23 N.m (17 ft. lbs.).
    Fig 2: Power Steering Pump, Pressure Hose & Return Hose
    GC0153844Courtesy of CHRYSLER GROUP, LLC
  2. Install the pressure line (3) on the pump and tighten the nut to 28 N.m (21 ft. lbs.).
  3. Install the return hose (2) on the pump.
  4. Install the drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
    Fig 3: Air Inlet, Connector & Clamps
    GC0153843Courtesy of CHRYSLER GROUP, LLC
  5. Position the air inlet (3) and tighten the clamps (1).
  6. Connect the electrical connector (2).
  7. Fill and bleed the system with power steering fluid. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals