LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Exhaust System) >> Sensor, Differential Pressure >> Removal >> Diesel
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Differential Pressure: Removal: Diesel

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Differential Pressure Sensor Wire Harness Connector, Zip Tie, Differential Pressure Sensor Hoses, Nut & Differential Pressure Sensor
GC0152165Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Disconnect the differential pressure sensor wire harness connector (1).
  4. Remove the zip tie (5) securing the differential pressure sensor hoses (4).
  5. Disconnect the differential pressure sensor hoses (4).
  6. Remove nut (2) and the differential pressure sensor (3).
scientia non olet · About LEMON Manuals