LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 762 (Power Seats (Service Information)) >> Switch, Memory >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch, Memory: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0176894Courtesy of CHRYSLER GROUP, LLC
  2. Remove the driver door panel as necessary to access the memory seat switch (1). Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Disconnect the wire harness connector (3) from the memory seat switch.
  4. Using a small flat bladed tool, gently disengage the retaining tabs (2) that secure the memory seat switch to the back of the driver door handle bezel.
  5. Remove the memory seat switch from the driver door handle bezel.
scientia non olet · About LEMON Manuals