Diagnostic Test
WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- RADIO FREQUENCY (RF HUB) DTCS PRESENT
- Ignition on, engine not running.
- With the scan tool, read DTCs in the RF Hub.
Are there any DTCs present?
Yes
- Perform the appropriate diagnostic procedure. Refer to RF HUB - DIAGNOSIS AND TESTING .
No
- Replace the Active Damping Control Module (ADCM) in accordance with the Service Information. Refer to MODULE, ACTIVE DAMPING CONTROL, REMOVAL .
- Perform the ADCM VERIFICATION TEST. Refer to ADCM VERIFICATION TEST .