LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass 2WD L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Lateral Accelerometer >> Service and Repair >> Dynamics Sensor - Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Dynamics Sensor - Installation






INSTALLATION






NOTE: The Occupancy Restraint Module (ORC) (4) is directly behind the vehicle dynamics sensor (2). Care must be taken while working near the ORC to avoid jostling or bumping the module.

1. Install the dynamics sensor (2) over the studs mounted to the floor pan tunnel.
2. Install the two mounting nuts (1). Tighten the nuts to 9 Nm (80 in. lbs.).
3. Connect the wiring harness connector (3) to the dynamics sensor (2).
4. Move carpeting back into original location.
5. Install the shifter housing Shifter Housing - Installation.
6. Connect the battery negative cable to the battery post. It is important that this be performed properly.
7. Perform the Verification Test and clear any faults Verification Tests.

scientia non olet · About LEMON Manuals