LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2011 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Intake Air Pressure >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Intake Air Pressure: Installation: Installation

Fig 1: Air Cleaner Cover, Mass Airflow Sensor, Inlet Pressure Sensor & Electrical Connectors
GC0131128Courtesy of CHRYSLER GROUP, LLC
  1. Check condition of sensor O-ring.
  2. Position Inlet Pressure Sensor (5) into top of air cleaner cover with a slight twisting action.
  3. Install mounting screw.
  4. Install Inlet Pressure Sensor electrical connector (4).
scientia non olet · About LEMON Manuals