LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2011 >> Grand Cherokee Limited, 5.7 T, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 5.7L
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sensor, Coolant Temperature: Installation: 5.7L

Fig 1: Electrical Connector, Sensor & Water Pump Housing
GC0144466Courtesy of CHRYSLER LLC
  1. Apply MOPAR® thread sealant with PFTE to the sensor threads.
  2. Install the coolant temperature sensor (2) into water pump housing.
  3. Tighten the coolant temperature sensor to 11 N.m (8 ft. lbs.).
  4. Connect the coolant temperature sensor electrical connector (3).
  5. Install air intake system. Refer to BODY, AIR CLEANER , INSTALLATION , 5.7L .
  6. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals