LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2011 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Accessory Drive >> PULLEY, Idler >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PULLEY, Idler: Installation: Installation

Fig 1: Accessory Drive Belt - World Engine
GC0083970Courtesy of CHRYSLER LLC
  1. Position pulley (5 or 9) in mounting position. Install idler pulley mounting bolt. Tighten bolt to 48 N.m (35 ft. lbs.).
  2. Install accessory drive belt (2). Refer to BELT, Serpentine, Installation .
  3. Install belt splash shield.
  4. Lower vehicle.
scientia non olet · About LEMON Manuals