LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Compass Sport, 2.4 B, ED3, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> SOLENOID, Variable Valve Timing >> Removal >> Front Solenoid 1/1
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Solenoid 1/1

Fig 1: OIL PRESSURE SENSOR
GC0082437Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Rotate hose clamp out of way.
  4. Disconnect oil pressure sensor electrical connector.
  5. Remove oil pressure sensor.
  6. Disconnect variable valve timing solenoid electrical connector.
    Fig 2: SOLENOID MOUNTING BOLT
    GC0082438Courtesy of CHRYSLER LLC
  7. Remove variable valve timing solenoid mounting bolt.
    Fig 3: SOLENOID MOUNTING TAB 1/1
    GC0082439Courtesy of CHRYSLER LLC
  8. Pull solenoid straight out of cylinder head.
scientia non olet · About LEMON Manuals