LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Commander Limited, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> MODULE, Glow Plug >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

MODULE, Glow Plug: Removal: Removal

  1. Disconnect the negative battery cable.
    Fig 1: Sprinter Glow Plug Module
    GC0079980Courtesy of CHRYSLER LLC
  2. Disconnect the battery positive harness connector (3) from the glow plug module.
  3. Disconnect the glow plug harness connector (4).
  4. Remove the two glow plug module bolts (2).
  5. Remove the glow plug module (1).
scientia non olet · About LEMON Manuals