SENSOR, Speed, Output: Installation: Installation

Fig 1: Input and Output Speed Sensors and Transmission Range Sensor

Courtesy of CHRYSLER LLC

1 - INPUT SPEED SENSOR

2 - OUTPUT SPEED SENSOR

3 - TRANSMISSION RANGE SENSOR

Install the output speed sensor (2) into the transmission case.
NOTE: Before installing the speed sensor bolt, it will be necessary to replenish the sealing patch on the bolt using MOPAR® Lock AND Seal Adhesive.
Install the bolt to hold the output speed sensor into the transmission case. Tighten the bolt to 9 N.m (80 in. lbs.).
Install the wiring connector onto the output speed sensor
Verify the transmission fluid level. Add fluid as necessary.
Lower vehicle.