FRAME, Ladder: Installation: Installation

Fig 1: Sealing Ladder Frame

Courtesy of CHRYSLER LLC

NOTE: When using RTV, the sealing surfaces must be clean and free from grease and oil.

NOTE: When using RTV, parts should be assembled in 10 minutes and tighten to final torque within 45 minutes.

Apply a 2 mm bead of Mopar® engine sealant RTV or equivalent as shown in illustration.

Fig 2: Ladder Frame Torque
Courtesy of CHRYSLER LLC
Install bolts and tighten as shown in illustration following a two step method.
- First: All to 10 N.m (89 in. lbs.).
- Second: All to 26 N.m (19 ft. lbs.).
Install balance shaft module. See Engine/Lubrication/PUMP, Engine Oil - Installation .
Install oil pan. See Engine/Lubrication/PAN, Oil - Installation .