LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (5.7L Engine (Service Information)) >> Engine Mounting >> Mount-Rear >> Removal >> Rear Engine Mount >> 4X4
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Engine Mount: 4X4

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Rear Mount (4X4)
GC0027234Courtesy of CHRYSLER LLC
  1. Raise the vehicle on a hoist.
  2. Using a suitable jack, support transmission.
  3. Remove the crossmember.
  4. Remove the fasteners (2) from the transmission mount (1) to transmission.
  5. Remove the mount.
scientia non olet · About LEMON Manuals