LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2009 >> Commander 4WD V8-4.7L Flex Fuel >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Connecting Rod >> Service and Repair >> Procedures >> Piston and Connecting Rod - Cleaning
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Piston and Connecting Rod - Cleaning






CLEANING

CAUTION: DO NOT use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly coating, this coating must not be damaged.

1. Using a suitable cleaning solvent clean the pistons in warm water and towel dry.
2. Use a wood or plastic scraper to clean the ring land grooves.

CAUTION: Do not remove the piston pin from the piston and connecting rod assembly.

scientia non olet · About LEMON Manuals