LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Relay >> Service and Repair >> Starter Relay - Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Starter Relay - Installation






INSTALLATION

1. Push down firmly on starter relay until terminals are fully seated into PDC receptacle.
2. Install PDC cover.
3. Connect battery cable.
scientia non olet · About LEMON Manuals