LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules >> Module-Diesel Engine Control >> Removal >> Engine Control Module (ECM)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Engine Control Module (ECM)

Fig 1: Removing/Installing Engine Control Module (ECM)
GC0026396Courtesy of CHRYSLER LLC
1 - ECM ELECTRICAL CONNECTORS
2 - ENGINE CONTROL MODULE (ECM)
3 - ECM MOUNTING BRACKET
4 - ECM MOUNTING BRACKET MOUNTING STUDS
5 - MOUNTING BRACKET RETAINING NUTS
  1. Disconnect negative battery cable.
  2. Disconnect ECM electrical connectors (1). See Fig 1.
  3. Remove ECM bracket (3) to inner fender retaining nuts (5).
  4. Remove ECM (2) and bracket assembly from vehicle.
  5. Separate ECM from bracket.