LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P0581 To P0643 >> P0632-Odometer Not Programmed In Pcm >> Diagnostic Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Diagnostic Test

  1. 1) PROGRAMMING MILEAGE INTO THE PCM 

    Ignition on, engine not running.

    With the scan tool, erase DTCs.

    Using a scan tool, program the mileage into the PCM.

    Start the engine.

    Allow the engine to reach normal operating temperature.

    With a scan tool, select View DTCs.

    Does the DTC reset? 

    Yes 

    1. Replace and program the Powertrain Control Module per Service Information.
    2. Perform POWERTRAIN VERIFICATION TEST .

    No 

    1. The mileage has been successfully programmed into the PCM. Test is complete.
    2. Perform POWERTRAIN VERIFICATION TEST .
scientia non olet · About LEMON Manuals