LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (Service Information) >> Starting >> Diagnosis And Testing >> Starting System >> Testing >> Control Circuit Testing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Circuit Testing

The starter control circuit components should be tested in the order in which they are listed, as follows:

  1. Starter Relay  - Refer to STARTER RELAY  The starter relay is located within the TIPM (Totally Integrated Power Module). Refer to "NO CRANK CONDITION ".
  2. Starter Solenoid  - refer to STARTER MOTOR  in the Diagnosis and Testing.
  3. Ignition Switch  - Refer to IGNITION SWITCH and KEY LOCK CYLINDER .
  4. Clutch Pedal Position Switch  - If equipped with manual transmission.
  5. Park/Neutral Position Switch  - If equipped with automatic transmission, refer to Park/Neutral Position Switch (if equipped). Replace park/neutral position switch if required.
  6. Wire harnesses and connections  - Refer to SYSTEM WIRING DIAGRAMS article.
scientia non olet · About LEMON Manuals