LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor-Accelerator Pedal Position >> Removal >> Accelerator Pedal Position Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Pedal Position Sensor

Fig 1: View Of Accelerator Pedal Assembly
GC0039516Courtesy of CHRYSLER LLC
1 - HARNESS CONNECTOR
2 - FASTENERS
3 - ACCELERATOR PEDAL ASSEMBLY
  1. Disconnect the negative battery cable.
  2. Remove the drivers side lower dash board close out panel.
  3. Disconnect the APP sensor electrical connector (1).
  4. Remove the accelerator pedal assembly fasteners (2) and the accelerator pedal assembly (3).
scientia non olet · About LEMON Manuals