LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander 2WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Duct >> Service and Repair >> Duct-Instrument Panel >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation






INSTALLATION





1. Position the left and right instrument panel and demister duct assemblies (2 and 4) to the instrument panel top cover (1).

2. Connect the instrument panel and demister duct assemblies to the panel end outlets (5) and the main distribution duct (3). Make sure that the duct assemblies are correctly installed over the outlet seals.

3. Install the screws that secure the instrument panel and demister duct assemblies to the instrument panel top cover. Tighten the screws to 2 Nm (17 in. lbs.).

4. Position the center instrument panel ducts (6) to the instrument panel top cover.

5. Connect the center instrument panel ducts to the main distribution duct.

6. Install the screws that secure the center instrument panel ducts to the instrument panel top cover. Tighten the screws to 2 Nm (17 in. lbs.).

7. Install the instrument panel top cover onto the instrument panel.

8. Install the instrument panel.
scientia non olet · About LEMON Manuals