LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander 2WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation






INSTALLATION





NOTE: There are different instrument panel switch pods available based on the option content of the vehicle. Ensure the switch pod being installed matches the vehicle options.

1. Position the lower instrument panel switch pod into the instrument panel center bezel.

2. Install the lower instrument panel switch pod fasteners.

3. Install the instrument panel center bezel.

4. Connect the battery negative cable.

5. Verify heated seat system operation.
scientia non olet · About LEMON Manuals