LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander 2WD V6-3.7L VIN K >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Relay >> Service and Repair >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation






INSTALLATION

1. Push down firmly on starter relay until terminals are fully seated into PDC receptacle.

2. Install PDC cover.

3. Connect battery cable.
scientia non olet · About LEMON Manuals