October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Lower Control Arm: Installation
- Position the lower suspension arm in the axle bracket and frame rail bracket.
NOTE:
Small holes in the side of the arm face inboard.
- Install the rear bolt and nut finger tighten.
- Install bolt/cam bolt and new nut finger tighten in the axle and align the reference marks.
- If equipped with ABS brakes install sensor wire to the inboard side of the arm with new clips.
- Lower the vehicle.
- Tighten axle bracket nut to 176 N.m (130 ft. lbs.).
- Tighten frame bracket nut to 176 N.m (130 ft. lbs.).
- Align vehicle to specifications. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .