LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Limited, 5.7 2, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Cruise Control System (Service Information)) >> SWITCH, Speed Control >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

SWITCH, Speed Control: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Speed Control Switch
GC0104362Courtesy of CHRYSLER LLC
  1. Position switch (2) to steering wheel.
  2. Install switch mounting screw (1) and tighten. Refer to SPECIFICATIONS  .
  3. Plug electrical connector into switch.
  4. Install airbag module. Refer to INSTALLATION .
  5. Connect negative battery cable to battery.
scientia non olet · About LEMON Manuals