LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Heater-Engine Block >> Installation >> 5.7L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Heater-Engine Block: Installation: 5.7L

Fig 1: Block Heater Components
GC0038943Courtesy of DAIMLERCHRYSLER CORP.
1 - BLOCK HEATER
  1. Thoroughly clean cylinder block core hole and block heater seat.
  2. Insert block heater assembly into the block.
  3. With block heater fully seated, tighten bolt to 2 N.m (17 in. lbs.) torque.
scientia non olet · About LEMON Manuals