LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (Service Information) >> Plug-Glow >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition System (Service Information): Plug-Glow: Installation

  1. Clean glow plug bay and install glow plug. Tighten glow plugs to 12 N.m (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover, for 5.7L (Refer to ENGINE - INSTALLATION) .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals