LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Relay-Starter Motor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Relay-Starter Motor: Installation

  1. Push down firmly on starter relay until terminals are fully seated into PDC receptacle.
  2. Install PDC cover.
  3. Connect battery cable.
scientia non olet · About LEMON Manuals