LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (4.7L Engine (Service Information)) >> Cleaner-Air Element >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cleaner-Air Element: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Air Cleaner Housing
GC0011742Courtesy of DAIMLERCHRYSLER CORP.
  1. Install filter element into housing (1).
  2. Position housing cover into housing locating tabs.
  3. Pry up 4 spring clips and lock cover to housing.
  4. Install air duct to air cleaner cover and tighten hose clamp to 3 N.m (30 in. lbs.) torque.
  5. If any other hose clamps were removed from air intake system, tighten them to 3 N.m (30 in. lbs.) torque.
  6. If any bolts were removed from air resonator housing or air intake tubing, tighten them to 4 N.m (40 in. lbs.) torque.
scientia non olet · About LEMON Manuals