LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Fuel System) >> Fuel Injection - Gas >> Sensor-Intake Air Temperature >> Installation >> 4.7L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor-Intake Air Temperature: Installation: 4.7L

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of IAT Sensor Tab/O-Ring - 3.7L/4.7L/5.7L
GC0006585Courtesy of CHRYSLER LLC
1 - IAT SENSOR
2 - SENSOR O-RING
3 - RELEASE TAB
  1. Check condition of sensor O-ring (2).
  2. Clean sensor mounting hole.
  3. Position sensor (1) into base and rotate clockwise until past release tab (3).
    Fig 2: IAT Sensor - 4.7L
    GC0051557Courtesy of CHRYSLER LLC
  4. Install electrical connector (2).