LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC Systems (Service Information)) >> Controls >> Sensor-Ambient Air Temperature >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor-Ambient Air Temperature: Installation

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ambient Temperature Sensor
GC0028316Courtesy of CHRYSLER LLC
  1. Install the ambient air temperature sensor (2) onto the top of the front bumper beam (3). Make sure that the retaining tabs (4) are fully engaged.
  2. Connect the wire harness connector (1) to the ambient air temperature sensor.
  3. Install the grille. Refer to INSTALLATION .
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals