LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (5.7L Engine (Service Information)) >> Air Intake System >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Intake System: Installation

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install filter element into housing.
  2. Position housing cover into housing locating tabs.
  3. Pry up 4 spring clips and lock cover to housing.
  4. Install air duct to air cleaner cover and tighten hose clamp to 5 N.m (45 in. lbs.) torque.
  5. If any other hose clamps were removed from air intake system, tighten them to 5 N.m (45 in. lbs.) torque.
  6. If any bolts were removed from air resonator housing or air intake tubing, tighten them to 5 N.m (45 in. lbs.) torque.
scientia non olet · About LEMON Manuals