LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (HVAC Systems (Service Information)) >> Controls >> Sensor-Ambient Air Temperature >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor-Ambient Air Temperature: Removal

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sensor-Ambient Temperature
GC0028316Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the grille (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
  3. Disconnect the wire harness connector (1) from the ambient air temperature sensor (2) located at the top of the front bumper beam (3).
  4. Disengage the ambient air temperature sensor from the retaining tabs (4) and remove the sensor.
scientia non olet · About LEMON Manuals