LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (5.7L Engine (Service Information)) >> Engine Mounting >> Mount-Rear >> Removal >> 4X2
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Mounting: Mount-Rear: Removal: 4X2

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Rear Mount (4X2)
GC0027233Courtesy of CHRYSLER LLC
  1. Raise the vehicle on a hoist.
  2. Using a suitable jack, support transmission.
  3. Remove the crossmember.
  4. Remove the fasteners (1) from the transmission mount to transmission.
  5. Remove the mount (3).
  6. Remove the transmission mount bracket (2), if required.
scientia non olet · About LEMON Manuals